Reset map IPMI Windows

This article has been created by an automatic translation software. You can view the article source here.

You have lost access to your IPMI card from your Server following a firmware update or loss of the password.

Prerequisites :

• Have a Server Boasting an IPMI
• Having a Windows Server operating system
• Have a functional administrator access to the Server
• Have a copy of the configuration of your network adapters (IP, mask network gateway ).

You can press this FAQ in order to make the return of the IPMI card factory :

You will need to retrieve l'archive available on the FTP server of Supermicro (available at this address ) :

ftp://ftp.supermicro.com/CDR-B9_1.00_for_Intel_B9_platform/IPMI/IPMICFG/Windows/IPMICFG-Windows_v1.10.zip

! ATTENTION ! There is a version 32 bit and a version 64 bits.

Once recover the archive and decompress it on your Server you will need to follow this procedure :

• Open a command prompt
• launch this series of command :

C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -fd
Reset to the factory default completed.
C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -dhcp off
Successfully disable DHCP.
C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -m x.x.x.x
IP=x.x.x.x
C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -k 255.255.255.xxx
Subnet Mask=255.255.255.x
C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -g x.x.x.x
Gatway=x.x.x.x

• Reconnect on your IPMI with factory ADMIN IDs /ADMIN
• Immediately modify identifiers (or at least the password ) your IPMI

Sort by date Sort by score

Enable comment auto-refresher

You are not allowed to post comments.