Reset map IPMI Windows
en:Reset map IPMI Windows
he:איפוס מפה IPMI Windows
ro:Resetare hartă IPMI Windows
ru:Карта сброса IPMI Windows
pl:Reset mapy IPMI Windows
ja:マップ リセット IPMI Windows
ar:خريطة إعادة تعيين IPMI Windows
zh:重置地图 IPMI Windows
de:Zurücksetzen-Karte IPMI-Windows
nl:Reset kaart IPMI Windows
it:Azzera mappa IPMI Windows
pt:Mapa de redefinir IPMI Windows
es:Mapa de RESET Windows IPMI
fr:Réinitialisation carte IPMI sous Windows
This article has been created by an automatic translation software. You can view the article source here.
You have lost access to your IPMI card from your Server following a firmware update or loss of the password.
Prerequisites :
- Have a Server Boasting an IPMI
- Having a Windows Server operating system
- Have a functional administrator access to the Server
- Have a copy of the configuration of your network adapters (IP, mask network gateway ).
You can press this FAQ in order to make the return of the IPMI card factory :
You will need to retrieve l'archive available on the FTP server of Supermicro (available at this address ) :
! ATTENTION ! There is a version 32 bit and a version 64 bits.
Once recover the archive and decompress it on your Server you will need to follow this procedure :
- Open a command prompt
- launch this series of command :
C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -fd Reset to the factory default completed. C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -dhcp off Successfully disable DHCP. C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -m x.x.x.x IP=x.x.x.x C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -k 255.255.255.xxx Subnet Mask=255.255.255.x C:\Users\Administrator\Desktop\64bit>IPMICFG-Windows.exe -g x.x.x.x Gatway=x.x.x.x
- Reconnect on your IPMI with factory ADMIN IDs /ADMIN
- Immediately modify identifiers (or at least the password ) your IPMI
Enable comment auto-refresher