Test bandwidth by using the utility Iperf
en:Test bandwidth by using the utility Iperf
he:בדיקת רוחב פס באמצעות השירות Iperf
ro:Lăţime de bandă de testare utilizând utilitarul Iperf
ru:Тест пропускной способности с помощью утилиты Iperf
pl:Test przepustowości przy użyciu narzędzia Iperf
ja:Iperf ユーティリティを使用して帯域幅をテストします。
ar:اختبار النطاق الترددي باستخدام الأداة المساعدة إيبيرف
zh:通过使用该实用程序 Iperf 测试带宽
de:Bandbreite Test mithilfe des Dienstprogramms Iperf
nl:Test bandbreedte met behulp van het hulpprogramma Iperf
it:Larghezza di banda di test utilizzando l'utilità Iperf
pt:Teste de largura de banda usando o utilitário Iperf
es:Prueba de ancho de banda utilizando la herramienta Iperf
fr:Tester sa bande passante à l'aide de l'utilitaire Iperf
This article has been created by an automatic translation software. You can view the article source here.
To test the bandwidth between two points, you can use the utility Iperf.
Use
After you install the utility on the two posts to test, you need to designate a Server and a client.
In the case of a Linux system commands to type are : For the position Server :
root@serveur:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------
For the client workstation :
root@client:~# iperf -c IP_DU_SERVEUR ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------
You will then get a result this type :
root@serveur:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 60.0 KByte (default) ------------------------------------------------------------ [ 4] local IP_DU_CLIENT port 5001 connected with IP_DU_SERVEUR port 2357 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.1 sec 6.5 MBytes 5.2 Mbits/sec
You can then start handling inverse, by replacing the Server customer and the client by the Server
Enable comment auto-refresher