Creating a network
ro:Crearea unei rețele
ru:Создание сети
pl:Tworzenie sieci
ja:ネットワークの構築
zh:创建一个网络
de:Schaffung eines Netzwerks
nl:Een netwerk creëren
it:Creare una rete
pt:Criação de uma rede
es:Creación de una red
fr:Créer un réseau
This article has been created by an automatic translation software. You can view the article source here.
Create a network on Vware Cloud Director
To allow your VMs to communicate on private or public networks, you must first create a Network.
We will see how to create a network.
===Creation of the network== =
First you have to go to the network section and click on "New".
It then needs to be linked to your virtual datacenter.
Here you can choose whether or not your network will be routed to the outside.
If you choose Isolated, it will only be accessible by a restricted group of machines and cannot be contacted from outside.
If you choose Routed, then this network can be configured in the Edge, have NAT rules and access other networks.
In the case of a "Routed" network you must choose the Edge to which it is linked.
You can then define the name of your network as well as the Network and its mask in CIDR notation.
You must then define the gateway for this network and the IPs that can be assigned on this network.
In the next part you can choose the DNS you want to use. It is however possible to configure it at the virtual machine level.
You can then check the configuration you have made and validate it by clicking on "Finish".
You can then use this network for your virtual machines.